§ 01 / Part
04010111 STEERING STEM BEARING KT
incl. VAT
Usually dispatched within 3 working days.
Authorised stockist
FACTORY LINKS
14-day returns
Easy & hassle-free
Secure checkout
256-bit encryption
§ 02 / About this part
What it is
The FACTORY LINKS STEERING STEM BEARING KT, motocross part. Stocked by Iron Offroad, the UK MX hard parts specialist.
Factory Links pack the taper rollers, races and seals you need to refresh a tired headstock on the EN500, GPX/GPZ 600, GPZ 900 or KL250. Direct OEM-spec replacement, so the stem drops back in without shimming or guesswork. Old bearings notch and the bar develops a centre detent on turn-in. Fit this kit, set the pre-load properly and the front end tracks clean again. Press the races fully home, grease the rollers before assembly and torque the stem nut to spec. Skip the grease and Kawasaki headstocks rust solid inside two winters.
§ 03 / Specs
The numbers
- Brand
- FACTORY LINKS
- Part number
- 04010111
- Weight
- 0.31 kg
- VAT
- 20%
// Fitment
Will it fit your bike?
Fits 31 models · 31 year-bands
Kawasaki 31 models
- EN 500 1990–2009
- GPX 600 R 1988–1997
- GPZ 600 R 1988–1989
- GPZ 900 R 1984–1993
- KL 250 2000–2009
- KLE 500 2003–2006
- KLR 250 1985–2005
- KLR 650 1987–2018
- KLX 230 ABS 2020
- KLX 230 R 2020
- KZ 1000 1982–2005
- VN 1500 1996–2004
- VN 1500 A 1987–1999
- VN 750 1986–2005
- VN 800 1995–2005
- VN 900 2006–2018
- VN-1500 1996
- W 650 2000–2002
- W 800 2015
- ZG 1000 1986–2006
- ZL 600 1996–1997
- ZR 1100 1992–1995
- ZR 550 1990–1993
- ZR 750 1991–1993
- ZR-7 2000
- ZR-7 S 2001–2003
- ZRX 1100 1999–2000
- ZRX 1200 R 2001–2005
- ZX-6 600 1990–2002
- ZX-6 R 600 1995–1997
- ZZR 600 2003–2004
No matches. Try a different make or model.
* Fitment data is provided as a guide. Verify compatibility against the bike's owner's manual or service handbook before ordering. Iron Offroad accepts no liability for incorrect application. Full terms and conditions apply.
§ 05 / About Iron Offroad
Iron Offroad
