§ 01 / Part
02151278 Wheel Bearing Kit
incl. VAT
Usually dispatched within 3 working days.
Authorised stockist
FACTORY LINKS
14-day returns
Easy & hassle-free
Secure checkout
256-bit encryption
§ 02 / About this part
What it is
The FACTORY LINKS Wheel Bearing Kit, motocross part. Stocked by Iron Offroad, the UK MX hard parts specialist.
Wheel bearings sit inside the hub and let the wheel spin true on the axle. Dirt, sand and pressure washers kill them. Once a seal goes, grit gets into the races — you feel it as lateral play at the rim or a notchy roll when you spin the wheel off the ground. This kit puts both hub bearings and the seals back to spec, so steering bites again and the chain stays in line. Fitting note: never drive on the inner race or you'll brinell the new bearing before it's seen a lap. Use a proper driver, or a socket that lands on the outer race only. Clean the hub bore, check for ovality, light smear of grease, then press square.
§ 03 / Specs
The numbers
- Brand
- FACTORY LINKS
- Part number
- 02151278
- Weight
- 0.38 kg
- VAT
- 20%
// Fitment
Will it fit your bike?
Fits 127 models · 134 year-bands
Gas Gas 15 models
Husaberg 19 models
- FC 450 2004–2005
- FC 550 2004–2005
- FE 250 2013–2014
- FE 350 2013–2014
- FE 390 2010–2012
- FE 450 2009–2014
- FE 450 E 2005–2008
- FE 501 2013–2014
- FE 550 E 2007–2008
- FE 570 2009–2010
- FE 650 E 2004–2008
- FS 450 C 2005
- FS 450 E 2005–2008
- FS 650 C 2005–2008
- FS 650 E 2005–2008
- FX 450 2010–2011
- TE 125 2012–2014
- TE 250 2013–2014
- TE 300 2011–2014
Husqvarna 25 models
- FC 250 2014–2022
- FC 350 2014–2022
- FC 450 2014–2022
- FE 250 2014–2023
- FE 350 2014–2023
- FE 350 S 2015–2016
- FE 350 S 2020–2022
- FE 450 2014–2023
- FE 501 2014–2023
- FE 501 S 2015–2017
- FE 501 S 2020–2022
- FS 450 2015–2022
- FX 350 2017–2022
- FX 450 2017–2022
- TC 125 2014–2022
- TE 125 2015–2016
- TE 150 2017–2019
- TE 150 I 2020–2022
- TE 250 2014–2018
- TE 250 I 2018–2022
- TE 300 2014–2018
- TE 300 I 2019–2022
- TX 125 2017–2019
- TX 300 2017–2019
- TX 300 I 2020–2022
KTM 75 models
- EXC 125 2003–2016
- EXC 150 TPI 2022–2023
- EXC 200 2003–2016
- EXC 250 2003–2017
- EXC 250 TPI 2018–2023
- EXC 300 2003–2007
- EXC 300 2011–2017
- EXC 300 TPI 2018–2023
- EXC 400 RACING 2003–2006
- EXC 450 2009–2016
- EXC 450 RACING 2003–2007
- EXC 500 2012–2016
- EXC 525 RACING 2003–2007
- EXC 530 2009–2011
- EXC-F 250 2017–2026
- EXC-F 350 2012–2023
- EXC-F 450 2017–2023
- EXC-F 500 2017–2023
- EXC-R 450 2008
- EXC-R 530 2008
- MXC 200 2003–2005
- MXC 250 2003–2005
- MXC 300 2003–2005
- MXC 450 RACING 2003–2005
- MXC 525 2003–2005
- SMR 450 2022
- SX 125 2003–2022
- SX 144 2008
- SX 150 2009–2022
- SX 200 2003–2004
- SX 250 2003–2022
- SX 450 RACING 2003–2006
- SX 525 2003–2006
- SX-F 250 2006–2022
- SX-F 350 2011–2022
- SX-F 450 2007–2022
- SX-F 505 2008
- XC 125 2021–2022
- XC 150 2010–2015
- XC 200 2006–2009
- XC 250 2006–2019
- XC 250 TPI 2020–2022
- XC 300 2006–2019
- XC 300 TPI 2020–2022
- XC 525 2004–2007
- XC 525 ATV 2008–2009
- XC-F 250 2007–2017
- XC-F 250 I 2018–2022
- XC-F 350 2012–2015
- XC-F 350 I 2016–2022
- XC-F 450 2008–2009
- XC-F 450 2013–2015
- XC-F 450 I 2010
- XC-F 450 I 2016–2022
- XC-F 505 2008–2009
- XC-W 125 2018–2019
- XC-W 150 2017–2019
- XC-W 150 TPI 2021–2022
- XC-W 200 2006–2016
- XC-W 250 2006–2018
- XC-W 250 TPI 2019–2023
- XC-W 300 2006–2018
- XC-W 300 TPI 2019–2022
- XC-W 400 2009–2010
- XC-W 450 2007–2016
- XC-W 500 2012–2016
- XC-W 525 2007
- XC-W 530 2009–2010
- XCF-W 250 2007–2010
- XCF-W 250 2012–2016
- XCF-W 350 2012–2016
- XCF-W 350 2020–2022
- XCF-W 450 2023
- XCF-W 500 2021
- XCR-W 530 2008
No matches. Try a different make or model.
* Fitment data is provided as a guide. Verify compatibility against the bike's owner's manual or service handbook before ordering. Iron Offroad accepts no liability for incorrect application. Full terms and conditions apply.
§ 05 / About Iron Offroad
Iron Offroad
