§ 01 / Part
09240456 REPLACEMENT NEEDLE BEARING
incl. VAT
Usually dispatched within 3 working days.
Authorised stockist
WOSSNER
14-day returns
Easy & hassle-free
Secure checkout
256-bit encryption
§ 02 / About this part
What it is
The WOSSNER REPLACEMENT NEEDLE BEARING, bottom end. Stocked by Iron Offroad, the UK MX hard parts specialist.
This component reduces friction at high-load pivot points within your engine. It typically sits at the small-end of the connecting rod to support the piston pin. These bearings endure massive thermal stress and constant reciprocating motion during the stroke. You should replace this every time you perform a top-end service or swap your piston. Failure to do so leads to excessive play and potential damage to the rod or cylinder bore. Check your specific workshop manual for the correct radial clearance. Always lubricate with assembly lube or two-stroke oil before sliding the pin through the assembly.
§ 03 / Specs
The numbers
- Brand
- WOSSNER
- Part number
- 09240456
- Category
- Bottom End
- Weight
- 0.01 kg
- VAT
- 20%
// Fitment
Will it fit your bike?
Fits 28 models · 32 year-bands
Gas Gas 5 models
Husaberg 2 models
Husqvarna 5 models
KTM 20 models
- EGS 300 1996–1997
- EGS 360 1996–1997
- EGS 380 1998–1999
- EXC 250 1996–2017
- EXC 300 1990–1994
- EXC 300 1996–2007
- EXC 300 2011–2017
- EXC 360 1996–1997
- EXC 380 1998–2001
- FREERIDE 250 R 2014–2017
- MXC 250 1996–2005
- MXC 300 2004–2010
- SX 250 1993–2017
- SX 250 2023–2027
- SX 300 1995
- SX 360 1996–1997
- SX 380 1998–2002
- XC 250 TPI 2023–2027
- XC 300 2004–2007
- XC-W 300 2006–2007
No matches. Try a different make or model.
* Fitment data is provided as a guide. Verify compatibility against the bike's owner's manual or service handbook before ordering. Iron Offroad accepts no liability for incorrect application. Full terms and conditions apply.
§ 05 / About Iron Offroad
Iron Offroad
// Related
